.jpg)
- 3M ADVANCED FLEXIBLE ENGINEER GRADE (PRINTABLE)
- 3M DIAMOND GRADE - DG3
- 3M DIAMOND GRADE CONSPICUITY MARKING - SIRIM VEHICLE MARKING
- 3M DIAMOND GRADE LINEAR DELINEATION SYSTEM
- 3M HIGH INTENSITY PRISMATIC (HIP)
- 3M REFLECTIVE SHEETING
- 3M ROADSTUD
- 3M STAMARK
- ADHESIVE SPRAY
- AURALITE ENGINEER GRADE REFLECTIVE
- CHINA REFLECTIVE
- COLOUR BAND
- FLUORESCENT ORANGE
- ORACAL
- ORALITE 5200 ECONOMY GRADE
- OTHERS
- PRINTABLE REFLECTIVE
- REFLECTIVE
- ROLLER STAND
- SQUEEZEE
Silverapple Trading
20A, (Ground Floor),
Jalan PJS 1/31,
Taman Petaling Utama,
46000 Petaling Jaya,
Selangor, Malaysia.
20A, (Ground Floor),
Jalan PJS 1/31,
Taman Petaling Utama,
46000 Petaling Jaya,
Selangor, Malaysia.
+603-7782 8315
+603-7783 8315
3M DIAMOND GRADE CONSPICUITY MARKING - SIRIM VEHICLE MARKING
| BE SEEN BE SAFE Increased Visibility Helps Improve Safety Drivers rely on what they can see. Vehicles with reflective conspicuity markings provide better visual information to drivers for faster detection and more accurate decision-making. 3M vehicle conspicuity markings are now available in a strong rigid construction product for smooth and even surfaces. High quality materials provide a durable film to withstand harsh traffic environment. They are easy to apply and come with aggressive, pressure sensitive adhesive that stands up to the rigors of the road. Certification : MS 828 : 2011 Road Vehicles and Side Marking-Specification (Second Revision) Durability : Up to 8 years of exterior durability Warranty : 5 years of retro reflectivity performance and color Security : SIRIM Certification Security Label Appearance : Vivid colors and bright yellow ensures maximum reflectivity and superior daytime color Construction : Durable and rigid (0.36mm to 0.40mm thickness) Sheeting resists fuel vapors or occasional spills Adhesion : High performance with application in tropical weather Application : User friendly with easy release liner Maintenance and Cleaning Hand wash with sponge, cloth, or soft brush using warm water and detergent. The cleaner must be wet, non-abrasive, without strong solvents and have a pH value between 3 and 11 (neither strongly acidic nor strongly alkaline). Rinse thoroughly. Using high pressure cleaning equipment, the following conditions should be applied / set up : - Maximum pressure 80 bar - Maximum temperature 60°C - Minimum of 1 metre distance of cleaning jet from sheeting surface - Cleaning wand to be held at no greater angle than 15 degree from perpendicular to the sheeting surface - Wide spray pattern | |||
 3M Vehicle Side Marking |  |  |  3M™ Diamond Grade™ Conspicuity Markings 983-72 ES |
 |  |  |  |
 |  |  |  3M Vehicle Marking |
 3M Vehicle Marking |  3M 983 White/Red | ||